Jeremiah Smith

• Performed preventative maintenance on welding tools and equipment.
• Fabricated and welded components to assemble structural forms, such as machinery frames, tanks, pressure vessels, and furnace shells.
• Communicated effectively with supervisors regarding progress updates on assigned tasks.
• Troubleshot problems related to welds including porosity issues caused by improper shielding gas flow rates.
• Maintained a clean working environment by removing scrap metal from work areas.
• Set up welding machines based on the job at hand.
• Cleaned joints before beginning any type of welding process by chipping off slag with a hammer or wire brush.
• Gathered required materials for each project in order to meet production deadlines.
• Followed safety guidelines through proper machine guarding and lockout and tagout procedures.
• Laid out, positioned, aligned and secured parts and assemblies with straightedges, squares and calipers.
• Transported materials from one site to another using off-road vehicles.
• Operated multiple pieces of heavy equipment in a safe and efficient manner to excavate land for construction projects.
• Accurately estimated material needs based on job specifications provided by supervisor.
• Managed daily operations of heavy equipment fleet, including troubleshooting and preventative maintenance.
• Loaded and unloaded trucks with construction materials such as gravel, sand, and asphalt.
• Followed safety protocols while operating machinery in order to avoid accidents or injuries.
• Performed routine inspections on all heavy machinery prior to use.
• Employed heavy equipment operation best practices resulting in minimal complaints or incidents.
• Transported materials around construction sites to work locations.
• Operated front end loader to move dirt and different base materials.
• Learned about new equipment and related attachments while maintaining knowledge of items used daily to meet job requirements.
• Loaded both raw materials and finished components to support manufacturing and production processes.
• Inspected and replaced worn vehicle parts to maintain safety and longevity.
• Operated excavators and other construction equipment to properly grade land.
• Performed pre-shift and post-shift equipment inspections and accurately completed reports to support company policy.
• Kept equipment fueled and ready for immediate use to support scheduling demands.
• Followed signals from ground crew and other operators to safely move materials and prevent dangerous interactions or missed cues.
• Promoted continuous improvement of workplace safety and environmental practices.
• Completed routine inspections on vehicles.
• Identified hazardous materials on job sites and took action to mitigate and enhance safety.
• Operated equipment to move and position raw materials or finished components.
• Performed minor service on equipment and referred complicated mechanical issues to appropriate personnel.
• Constructed templates and jigs for fabrication according to blueprints.
• Repaired broken or cracked parts using cutting torches and welding equipment.
• Maintained detailed records of hours worked, materials used, and completed jobs.
• Operated digging and transporting equipment to efficiently fulfill project requirements.
• Assisted drivers, equipment operators, and other employees in grouping and sorting materials.
• Identified potentially hazardous or unacceptable materials at job site and coordinated proper disposal.
• Followed safety regulations while operating equipment to achieve safe conduct.
• Oversaw proper PPE use to facilitate working conditions compliant with safety regulations.
• Loaded and offloaded rocks, debris and other materials from heavy equipment.
• Loaded and moved dirt, rocks, equipment and materials.
• Operated equipment to remove debris, snow or other equipment from streets and work areas.
• Kept records of material or equipment usage and completed entries in production logs.
• Coordinated machine operations with other site personnel to keep materials moving smoothly and prevent accidents.

I was responsible, for preparing and loading the bending machine. Also I was responsible for unloading new pipe or materials the were to be bent, as well as loading customer orders that were completed, with a cat forklift

• Maintain records of completed work and production data including volume produced and time required for each task.
• Performed regular maintenance on machines to ensure optimal performance.
• Troubleshoot malfunctions in equipment or processes.
• Observe machine operations to detect any problems or defects in the finished product.
• Read blueprints and job orders to determine product specifications and tooling instructions.
• Carry out regular safety checks on machinery prior to operation.
• Record production information such as quantities produced and materials used on daily logs.
• Adjusted machine settings according to production requirements.
• Perform periodic maintenance on machines such as cleaning and lubrication.
• Adjust machine settings to complete tasks accurately.
• Comply with company policies regarding quality control procedures.
• Load raw materials into machines according to specified measurements.
• Inspect finished workpieces to ensure conformance with specifications.
• Identify areas where improvements can be made in terms of efficiency or cost savings.
• Monitor the feed and speed of machines during the machining process.
• Ensure that safety guidelines are followed at all times while operating machinery.
• Replace worn tools, sharpen cutting tools, adjust machinery components.
• Check products for accuracy using measuring instruments such as calipers, micrometers, gauges.
• Set up and operate machine tools to produce precision parts and instruments.
• Collaborate with other departments when necessary for successful completion of projects.
• Prepared machine for production processes by equipping with required tools and parts.
• Verified production orders prior to starting set-up.
• Assisted with troubleshooting issues that arose with facility production processes.

• Cleaned machine parts with solvents before assembly or installation.
• Provided technical support to colleagues when required.
• Analyzed data from test runs to identify areas for improvement.
• Repaired and replaced defective parts to restore machinery to working order.
• Used hand tools such as hammers, wrenches and screwdrivers to complete tasks efficiently.
• Adjusted functional parts of mechanical devices as needed.
• Fabricated metal components using welding and cutting tools.
• Aligned machines properly for efficient operation.
• Drilled and tapped holes for installation of studs.
• Read and interpreted complex blueprints and drawings.
• Read and interpreted specifications, diagrams and blueprints for job.
• Used welding and soldering equipment to join sheet metal components following blueprints and job specifications.
• Observed safe work rules and utilized fall protection and PPE.
• Prepared construction sites, materials and tools for specific projects and loaded and unloaded equipment and products.
• Followed company and governmental health and safety regulations and trained new team members.
• Followed safety, environmental, and regulatory policies by properly handling and disposing of hazardous waste.
• Read and interpreted construction blueprints for various projects.
• Put together and took apart scaffolding and other temporary structures.
• Moved construction materials by hand or various transport methods.
• Engaged in preparation work to ready worksite for installers.
• Assisted tradesmen and machine operators in construction projects.
• Removed debris, garbage and dangerous materials from sites and assembled and broke down ladder equipment.

• Operated front end loader to move dirt and different base materials.
• Performed pre-shift and post-shift equipment inspections and accurately completed reports to support company policy.
• Operated excavators and other construction equipment to properly grade land.
• Employed heavy equipment operation best practices resulting in minimal complaints or incidents.
• Promoted company's strict safety protocols for operation of machinery to reduce accidents and injuries.
• Kept equipment fueled and ready for immediate use to support scheduling demands.
• Transported materials around construction sites to work locations.
• Learned about new equipment and related attachments while maintaining knowledge of items used daily to meet job requirements.
• Followed signals from ground crew and other operators to safely move materials and prevent dangerous interactions or missed cues.
• Maintained machinery by repairing and replacing broken and malfunctioning components.
• Created holes and trenches for underground stormwater sewer infrastructure.
• Organized and maintained tools and equipment to enhance work efficiency.
• Measured, cut and laid out materials based on individual job requirements.
• Followed plans, orders and technical specifications to complete accurate work that met project specifications, codes, and quality standards.
• Read written instructions carefully and communicated with team members clearly to promote workplace safety.
• Used organizational skills to meet productivity requirements.
• Kept machinery clean, lubricated and well-maintained for optimum use.
• Constructed and removed support structures such as scaffolding, ramps and braces.
• Mixed, poured and spread concrete, asphalt and other materials with high accuracy to meet project requirements.
• Dug ditches and trenches at target locations and backfilled excavations.
• Transported, measured, cut and installed [Type] and [Type] materials.
• Trained in how to complete skilled job tasks and projects.
• Moved [Type] and [Type] materials using manual shovels and heavy equipment.
• Helped craft workers such as [Job title]s and [Job title]s by bringing materials, moving equipment and carrying out basic tasks.
• Decreased safety accidents by closely monitoring coworkers, [Type] tasks and construction areas.
• Erected [Type] equipment for [Type] tasks, adjusting necessary setups based on changing weather and project needs.

• Operated front end loader to move dirt and different base materials.
• Performed pre-shift and post-shift equipment inspections and accurately completed reports to support company policy.
• Inspected connections, tires and other components of machinery before operating to monitor for safety and functionality.
• Transported materials such as [Type] around [Type] site.
• Communicated with [Job title] to coordinate daily tasks.
• Arranged goods in supply yard and rotated following instructions to organize.
• Promoted company's strict safety protocols for operation of machinery to reduce accidents and injuries.

• Maintained clean, safe working environment by removing waste from job site prior to shift completion.
• Met company and OSHA safety guidelines for work site operations to minimize worker risk.
• Sorted and placed materials or items on racks, shelves or in bins to keep warehouse organized.
• Collaborated with team members to complete assigned tasks and meet tight deadlines.
• Loaded and unloaded daily material shipments, keeping products organized and secure to prevent damage and optimize handling.
• Participated in company training sessions to improve skills and boost process knowledge.

• Organized warehouse inventory according to warehouse plan.
• Loaded completed orders on pallets according to delivery numbers.
• Managed full range of warehousing activities including receiving, storing and shipping.
• Observed inventory allocation to maintain material needs and production deadlines.
• Protected company inventory by maintaining and organizing storage areas.
• Palletized boxes to streamline movement and shipment.
• Utilized forklift to move inventory items.
• Disposed of debris and hazardous materials properly to avoid contamination.
• Operated overhead lifts to move heavy and bulky work materials.
• Unloaded cargo from trucks with mechanized equipment.